High feed carbide face milling cutters APKT1705PER-EM,Tungsten Carbide Materials Excellent Wear Resistance
Description:
CNC Tungsten carbide inserts for metal machining , tungsten carbide
milling inserts
Zhuzhou Kelite Tungsten carbide inserts
1, Higher positive helix angle for smoother machining / -7°(APKT
1705) → 13° (APKT 1706)
2, Thicker and stronger insert design / -5.6 mm (APKT 1705) → 6.5
mm (APKT 1706)
3, Smooth machining with excellent performance
4, Strong and stable machining with higher productivity
5, Appropriate for roughing machining in heavy industries such as
power generation and wind turbine manufacturing
6, High helix angle decreases the cutting load to achieve a stable
and smooth cutting performance
Main Grade Introduction
| KT1101 | High wear resistance of the matrix and MT-TiCN, thick Al2O3 and TiN
coating. |
| KT1102 | Thick TiCN and Al2O3 coating |
| KT1201 | tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| KT1202 | Tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| KT1301 | Tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| KT8209 | PVD grey black |
| KT8206 | nc-TiAN coating and fine-grained matrix. |
| KT8207 | Added abrasion resistance and high temperature rare elements
ultrafine TiAlN based nano-coating. High layer hardness and
excellent resistance to high temperature provide effective
protection for the cutting edge. |
| KT8305 | nc-TiAN coating and flexible cemented carbide matrix. |
| KT8205 | Special organizational structure and TiCN, thin Al2O3 and TiN
coating. |
| KT2201 | Good toughness and strength matrix and TiCN, thin Al2O3 and TiN
coating. |
| KT2202 | With the advance extra fine grain nanometer coating technology,
match up with the high toughness gradient matrix. |
| KT3150 | CVD coating(extra thick Al2O3 & thick TiCN), hard matrix. |
| KT3152 | CVD coating (thick Al2O3 & thick TiCN) , hard matrix. |
| KT3202 | CVD coating (thick Al2O3 & thick TiCN), hard matrix, it is
anti-stripping. |
| YBD252 | CVD coating (middle thick Al2O3 & thick TiCN), hard matrix. |
| KT1100 | Uniform particle refining organizational ceramal alloy,
homogenizing organizational & ring form phase structure,
Strengthen bond phase,grain boundary composition design. |
| KT1101 | Physics weather deposit (PVD) coating, high toughness ceramal
matrix. |
| KT3150 | Fine particle hardness phase WC and bond phase Co. |
| KT3200 | Middle particle hardness phase WC and bond phase Co. |
Commonly used milling inserts models:
APMT/APKT/AOMT/SEET/BLMP/ONHU/RDKW/RPMT/RDMT/RCMX/RCKT/3PKT/WCUX/WOGU/TPKN/LNKX
/SPMT/SPUN/TPGN/WPGT...
Horizontal Into Hole Inserts Types:
Feature Advantages:
It has excellent abrasion resistance and ideal impact
resistance.Suitable for HRC25 ° ~ 48 ° all kinds of material of
high speed low feed processing, quenched and tempered material
ideal processing tool, universal good;Corresponding general
tungsten steel, with 2~4 times of service life.Generally used for
good stable working condition, good clamping of parts and
continuous high speed light cutting.Excellent results after
coating, can be processed to HRC60 ° all kinds of material, the
corresponding (ISO P15 ~ P30 / K15 ~ K30) used in CNC numerical
control equipment processing all kinds of high temperature alloy,
heat-resistant alloy, nickel and vanadium titanium cast iron,
stainless steel and other hard processing material (ni, Cr, Mo,
silicon, titanium, etc.) before and after tempering heat treatment
of excellent machining tools.High temperature processing and
comprehensive performance are excellent, and the cutting speed is
extremely high (generally the linear speed is above 120M), and the
feeding quantity is required to be low. The higher the hardness of
the processed material, the more remarkable the effect.Due to poor
toughness, it is not suitable for discontinuous cutting or under
the condition of insufficient rigidity of the process system and
slight vibration and beating, otherwise it is easy to make or break
the blade.
Confirm the processed materials, hardness HRC, equipment rigidity
(value), quantity, according to the drawing and sample requirements
grinding molding Angle and size tolerance..Only batch production
now, can completely replace the world-class products, with a very
high cost performance!
